Heat-transfter Prining Ceramic Mugs Making method
1, set the image printed area of heat transfer of the cup in general about 20cm*8.5cm, 1 sheets of A4 paper can put 3 images. Note that the image should be set to a horizontal flip or image mode, otherwise the image of the printed to the cup is the opposite;
2, print crop: with special heat transfer printing ink on the thermal transfer paper or color ink-jet printing paper, printing completed along the edge of the image cut, general cutting to size can be 21cm*9.5cm around;
A third second first; 3, roast process of cup: image and paste it in the glass with high temperature adhesive tape fixed; the cup into the baking cup machine pressing baking cup machine set: 1) boot press the mode button to set the minimum temperature (up and down key to adjust the temperature of 180 DEG F (about 82.222 DEG C, 2) on the mode button to set the highest temperature (up and down key to adjust the temperature) 310 degrees F (about 154.444 DEG C, 3) by the mode button to set cup baking time of 30 seconds (up and down key to adjust the time); 4) according to the mode button to the fourth time the machine to enter the standby state; 5) according to the box button, the machine operation is performed.
4, baking cup machine will be up to the maximum temperature after the countdown 30 seconds (set the time), after the completion of the automatic alarm machine. Shut off the power and took the cup, tore up the transfer paper, a unique glass produced complete (just finished the cup is very hot, torn paper to note)!