The production process of ceramic coating Mug
The coating layer on the mug must have a certain way, otherwise the coating is not uniform, will affect the quality of the coating mug.
A, dip coating construction (also can spray construction) ---- applicable to small processing
1, before treatment: the fabric surface clean; cloth wipe dry, no water; and then put the oven dry (150 degrees); after the removal of the cooling.
2, the mug is immersed in solution after cooling base, completely covered in tilt out, if the mug can not let coatings were immersed in the mug, mug can be soaked in the cup, just soaked to the external.
3, put the mug in a good mug of dust in the cabinet or the enclosed room for 5-10 minutes, so that the treatment of cool dry. At the same time, turn on the oven and let the oven heat up to 200 degrees.
4, the coated mug in 200 degrees or more in the oven bake about 15-20 minutes.
Note: before use must be mixed evenly, with the seal of the tank cover. This product is flammable dangerous goods, please far away from the fireworks, placed in a cool and dry place sealed to save.
B, spray construction - for a large number of processing and processing tools:
1, spray gun (the market reference price of 200 yuan - 300 yuan)
2, air pump (air compressor) (market reference price of 1000 yuan, 2000 yuan)
3, exhaust equipment, such as: axial flow fan (market reference price of 500 yuan - 600 yuan)
4, with a blast of industrial ovens. (market reference price of 1000 yuan - can be selected according to the production of different power and different price)
Operation flow:
1, on the surface of the product according to the horizontal and vertical horizontal and vertical sequence of uniform spray four times.
2, at room temperature and dust (such as wooden cabinets) in the plane placed 10 - 5 minutes, so that the treatment of cool dry.
3. Bake in the oven for about 20 minutes in 200 degrees.
4, at room temperature to cool down.
|
