|
|
|
 |
Now : Home > Ceramic Mug News |
|
|
Advantages and disadvantages of the process of making ceramic cup by injection molding |
| Ceramic Mug From:Xinxiang Ceramic Mug Manufacturers 2016-3-10 |
|
So-called injection molding process is the mud into the plaster mold ceramic mug, because the plaster mold suction function, so the plaster will absorb the moisture of the inner wall of mud, production of ceramic cup of green body formation, and will die before dry mud poured out, thus forming the structure of the compact ceramic cup.
Grouting technology is pure hand molding process method, so the production efficiency is low, the cost is higher. But the use of hardware equipment is plaster mold, so in the production of mold production costs less than machine press production process will reduce a lot of. So a lot of small orders for the use of a large number of grouting process to complete.
But it is easy to change the phenomenon of the ceramic cup produced by grouting process. Because the product structure of the injection molding is not so good as the machine pressure process, so in the time of firing more cases will appear variant phenomenon.
Some special-shaped ceramic cup, must to the grouting technology to make, such as square ceramic cup, or a half circle and ellipse ceramic cup and so on. The molding of the cup machine pressing process can not be completed.
|
Previous : Custom full printing logo ceramic mug cup with logo
Next : specially shaped ceramic cup ceramic mugs |
|
|
|
