|
|
|
 |
Now : Home > Ceramic Mug News |
|
|
Shape Ceramic Mugs what advantages and disadvantages of porous tunnel kiln |
| Ceramic Mug From:Xinxiang Ceramic Mug Manufacturers 2016-3-9 |
|
3# V Shape Custom blank Ceramic Mugs
The main advantage is:
(1) covers an area of small, less investment. 15 meters long, 16 hole kiln, investment of about 40000 yuan. Covering an area of about 60 - 80 m 2.
(2) equipment is relatively simple. If not considering the waste heat utilization, the fan can also be omitted. (3) as pore cross-sectional area is small, so the temperature is uniform, good product quality, production is higher.
At the same time, due to the cancellation of the sagger, heat utilization rate is improved, the cost can be reduced. At the same time, due to the cancellation of the sagger, heat utilization rate is improved, the cost can be reduced.
(4) the firing cycle is short, generally about 10 hours, the shortest only 1 - 2 hours.
(5) to adapt to a variety of product of small sintering, sintering system than the general tunnel kiln flexible adjustment.
The main drawback is the:
(1) larger wear push plate and the channel bottom slide bars, often several months on the floor was removed, the push plate forward for sliding friction, so the friction resistance. Push plate short service life, general clay refractory plate number is about 20 times.
(2) is difficult to control the reducing flame, at present can only oxidation burning.
(3) for producing thick, large products.
|
Previous : Micky ceramic mugs cup what products suit porous tunnel kilm
Next : Ceramic advertising cup mug,promotional cup mug |
|
|
|
