Barbie custom ceramic mug handmade cup
Ceramic design and production processes are closely related, a ceramic products, through the processing of raw materials, molding, glazing, firing, art decoration process.
Therefore, each link must comply with the requirements of the production process. Specifically, the following aspects:
Mud plasticity strong, other changes can be more; plasticity poor, while other changes should be less. Physical properties and shrinkage rate of different materials is larger, should not be used in a modeling. Otherwise it will cause deformation, loss and other defects. (2) other structure to meet the minimum stress limit, excessive stress changes against stress limit variable, the other is in the high temperature deformation, collapse, become waste.
(2) other structure to meet the minimum stress limit, excessive stress changes against stress limit variable, the other is in the high temperature deformation, collapse, become waste.
(3) other to withstand high temperature firing test. Therefore, the high temperature must master the raw material sintering changes, design meets the firing system requirements.
|
